FREE Shipping anywhere in North America!

Quick Start Guide

Here you will learn about all of the eScarf controls and how to use your eScarf properly.

Step 1

Slide the provided comfort cloth over the two conduction pads.

Step 2

Plug the USB cable into the USB Port.

Step 3

Connect the opposite end of the USB cable to one of the USB ports in the power bank battery.

Step 4

Select the desired temperature setting. Slide left for warming and right for cooling.

Step 5

Turbo Mode (optional): Increase the power of the temperature setting to increase the heating or cooling effect. A red light will turn on when turbo mode is active.

Step 6

Place the iThermic eScarf around the back of your neck so it rests snugly in the nape of your neck.

Step 7

To adjust the fit, simply rotate the Neck Size Knob to achieve your desired fit. Turn counterclockwise to tighten and clockwise to loosen.

Step 8

Check the fit of the eScarf carefully. The heating and cooling pads should be comfortably snug.

Step 9

In Heating Mode the eScarf can be covered with a scarf or worn under layers of clothing to maximize heat retention.

**** WARNING ****.

In Cooling Mode the exhaust fans must have unobstructed airflow to provide any cooling.